Hot Air Oven
Approx. Rs 24,000 / Unit
- Size (mm X mm X mm): CUSTOMISED
- No of trays: 2.0, 4.0
- Display: Digital
- Power (KW): 3 KW
Size: based on the customers recommendation or need.
These are sturdy double walled units with outer chamber made of m. S. Sheet duly enamel painted with inner made up of mild steel or S. S. Sheet. The gap between inner and outer chamber is filled with high-grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. inner chamber is provided with ribs for adjusting perforating shelves to convenient height. Temperature is controlled by hydraulic type capillary thermostat from ambient to 300'c + 3'c. a dial thermometer is fitted to the unit for reading the chamber temperature. Air ventilator is also provided on the sides of the unit to work on 220/230 volts A. C. Supply. All unit are fitted with air circulation fan as a standard feature.
Approx. Rs 47,000 / Unit
- Brand: MANI DHARMA
- Model: MDBT
- Size: CUSTOMISED
- Size: based on the customers recommendation or need.
These cooling incubators are designed especially for close control of incubation/storage temperature. These are used for B. O. D tests, storage of sensitive cultures, vaccines etc, culture of bacteria microorganism and plant life, seed germination work, serum incubation studies and immunological work etc. Constructed of double walls, the exterior is made of mild steel. Flush fitting insulated door has magnetic gasket, the inner chambers made of stainless steel. The flexi glass inner door makes it possible to inspect microorganism without disturbing the temperature. The shelf position of trays is adjustable. A compartment is formed at the back of interior into which is fitted the refrigeration evaporator, heater and powerful centrifugal forced air circulator for creating positive air flow through the incubator. A hermetically sealed compressor housed below the incubator provides temperature below ambient. Built in safety thermostat prevents damage to samples in case of temperature controller malfunctioning. All controls are mounted on the top of the incubator comprising self-illuminated mains on/off switch, heat energy regulator, digital temperature indicator controller and indicating lamps.
Approx. Rs 25,000 / Unit
Size: Based on the customers recommendation or need.
Designed for continuous shaking of solutions in 250 ml / 500 ml / 1000 ml / 5000 ml capacity. It is a compact bench type table top model with platform fitted with rubber disc mounted on ball bearing crank shafts to give on orbital motions to the flasks. Within a diameter of approx 2" the motor is coupled by means of A V. Belt with pitch pulley and is mounted on a heavy and sturdy angle iron frame. The machine can be supplied with variable speed, to work on 0. 5 hp motor 220volts A. C. Supply.
Approx. Rs 35,000 / Unit
Size: Based on the customers recommendation or need.
These are sturdy double walled units with outer chamber made of M.S.Sheet duly enamel painted with inner made up of anodized aluminum or S.S.Sheet. The gap between inner and outer chamber is filled with high-grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjuring perforated shelves to convenient height. The door is fitted with glass viewing window to facilitate inspection of sample without disturbing the test temperature. Temperature is controlled by hydraulic type capillary thermostat from ambient to 70'c + 0. 5'c. An L-shaped prismatic thermometer is fitted to the unit for reading the chamber temperature. Air ventilators are also provided on the sides of the unit. To work on 220/230 volts AC supply.
Approx. Rs 4 Lakh / Unit
Borosilicate glass vessel / Glass Fermentor (3, 5, 7 Lit Capacity)
- Accuracy: 0.01 Degree C
- pH range: 2 to 12
- Range: 0.5 L / Min
- Voltage: 230 VAC
Mixing assembly - HX: d 250 x 150 mm, mounting stand with safety ring, head plate assembly, 16 port head plate, diameter 200 mm & thickness 7 mm, material – ss 316 l, 2 – height adjustable ruston impeller with 6 blades each, 3 baffles – no welding joints, materials ss 316 l
- Aeration : Air sparger – l –type with micro pores, air outlet with 0. 2 filter sampling-6 mm dia sample pipe
- Addition : Media triple inlet for acid, base & antifoam, heat exchanger, u-type exchanger for hot water circulation, cylindrical exchanger for cold water circulation, thermopocket for pt 100 sensor
- Holders : nipple m3 / 8 x psp for ph & do sensor, nipple for foam sensor
- Model: hygene plus, control parameter: larger lcd display, set value vs process value bar diagram, online graphical form of all parameter, manual / auto mode, auto calibration of ph & do, user can decide lower & upper limits, computer connectivity, data logging of all parameter
- Agitation- Stirrer motor pmdc, speed range – 50 – 1000 rpm, rpm display-accuracy 5 rpm
- Temperature : Temperature range – ambient + 5oc to 60oc, accuracy +/ - 0. 01oc, uniformity +/ -0. 4oc
- Digital display-Simultaneous display of sv & pv, feather touch keypad
- PH control : PH range 2-12, accuracy +/-0. 01, uniformity +/-0. 1, auto calibration, atc (automatic temperature compensation).
- Manual mode operation of pumps of addition / harvesting- bnc connector.
- Do control-do range 0-100%, selectable units’ %, accuracy +/-1%, proportional two gas mixing option (air & o2)
- One set point – 100% oxygen, 2nd set point – 0% by purging nitrogen, bnc connector, manual mode of air & o2 valve opening, foam control, level base, fed batch application
- Bio sensors : rpm sensor (sense actual speed of motor), pt 100 thermal sensor length – 210 mm), gel filled autoclavable polarographic ph sensor – imported, length – 225 mm dia – 16 mm, autoclavable & refillable do sensor – imported, length – 225 mm dia – 16 mm, height adjustable foam / level sensor – autoclavable
- Actuators : three fixed speed peristaltic pumps, for acid, base & foam addition
- Range : 0. 5 lit / min for airflow, range : 0-1 lit / min for o2 flow, heating bath with circulation, cooling valve, air pump 1/4 hp – oil free medical grade
- Silicon tubing – autoclavable, 2 mm dia for acid, base & foam addition, 5 mm dia for sampling & addition, 6 mm dia for hot & cold water circulation
- Addition bottle: 3 nos for acid, base & foam, 500 ml capacity, threaded cap with two pipe, air filter – imported autoclave & reusable air filter of 0. 2 micron size
- Starter kit: Set of o – rings for all ports including head plate, lip seals, viton v- rings, align key, spanner, septum, additional micro filters & tubing.
Voltage: 230 vac / 50 khz, power consumption: 1 kw, single / three phase.
- Air pump - 1no.
- Suitable stabilizer - 1no.
- Chiller cum circulator - 1no.
Suitable computer piv (assembled) - 1no.